NIHON SHINBAN CO.,LTD.
to TOP PAGE to PRODUCTS PAGE to ABOUT PAGE to DOWNLOADS PAGE to CONTACT US PAGE JAPANESE
WorkPool(WorkStocker) WPseries
WorkPool(WorkStocker) WPseries
to PRODUCTS PAGE
to Cutting Process Machine PAGE
to Single Purpose Lathe NS82T PAGE
to Single Purpose Lathe NS91T PAGE
to CNC LATHE NC82T PAGE
to CNC LATHE NC91T PAGE
to CNC LATHE 1HNC PAGE
to CNC LATHE 2HNC PAGE
to CNC TURRET LATHE X39 PAGE
to Peripheral Unit PAGE
to MARKING PRESS PAGE
to MEASUREMENT UNIT PAGE
to WORKPOOL PAGE
to BELT TYPE STOCKER
to HOPPER & FEEDER PAGE
to Special Purpose Machine PAGE
to Roll Plastic Process Machinery PAGE
Advantages
Workpool (WP series) is installed in the last point of the cutting line, and is aligned as the turn that the complete item was processed.
If the complete items are received by boxes without workpool, in case of generating NG items, it is impossible to sort out whether it is NG items from where.
In the worst case, the box including the NG items will have to be thrown away.
In order to avoid such a situation, we strongly recommend installing the workpool as alignment machine to the last of the cutting line.
Depending on installing the workpool, not only the cause specification becomes easy, but also it is easy to prevent the problem of product blemish rather than box receiving process.
WorkPool WP3
Machine Specification - WORKPOOL(WORK STOCKER) WP series
WP1 WP2 WP3 WP4
Target Range O.D.(φmm) 20 to 150*
Width(mm) 5 to 40
Stock Capability Stock Method Fall Type Shutter Type Fall Type Shutter Type
Work Style (recommendable) Outer Ring Inner Ring Outer Ring Inner Ring
Sotck Direction Near Side Back Side
Number of Max. Stock Depending on O.D. or width of the work
Control Device Mitsubishi FX series
‘¼ŽÐ possible to change to the user specification**
Machine Size Floor space
W x D (mm)		 600 x 1000***
Mass of Machine(kg) 150**** 160**** 150**** 160****
*
The maximum diameter is desirable for about double of the minimum.
**
Option
***
Depending on machine specifications, Machine size must be changed.
****
Depending on machine specifications, Mass of machine must be changed.
General view
WorkPool WP3
WorkPool WP2
WorkPool WP3
WorkPool WP2
Operation Explanation
WP1 / WP3 type workpool is for outer ring.
It is the system that a fix number of works in one sequence is pooled in WP1/WP3, every sequence falls by about 10 mm, and the sequence is pooled in the back row.
WP2 / WP4 type workpool is for inner ring.
Usually shape of inner ring is more complicated than that of outer ring.
The outer surface of inner ring tend to get damaged by fall; blemish or bruise.
It is the system that a fix number of works in one sequence is pooled in WP2/WP4, the shutter was opend and closed, and the sequence is moved to back row without fall.
WorkPool WP2
WorkPool WP3
WorkPool WP3 for outer ring
WorkPool WP2 for inner ring
Copyright (c) NIHON SHINBAN CO.,Ltd. All Rights Reserved.