NIHON SHINBAN CO.,LTD.
to TOP PAGE to PRODUCTS PAGE to ABOUT PAGE to DOWNLOADS PAGE to CONTACT US PAGE JAPANESE
CNC TURRET LATHE X39
CNC TURRET LATHE X39
to PRODUCTS PAGE
to Cutting Process Machine PAGE
to Single Purpose Lathe NS82T PAGE
to Single Purpose Lathe NS91T PAGE
to CNC LATHE NC82T PAGE
to CNC LATHE NC91T PAGE
to CNC LATHE 1HNC PAGE
to CNC LATHE 2HNC PAGE
to CNC TURRET LATHE X39 PAGE
to Peripheral Unit PAGE
to MARKING PRESS PAGE
to MEASUREMENT UNIT PAGE
to WORKPOOL PAGE
to BELT TYPE STOCKER
to HOPPER & FEEDER PAGE
to Special Purpose Machine PAGE
to Roll Plastic Process Machinery PAGE
High Durability
This CNC TURRET LATHE X39 is developed in order to cut large-diameter and heavy weight work pieces like for a train axle bearing for example outer diameter 300mm and width 200mm.

High rigidity sliding-surface width 400 mm slides and heavy turrets are included in X39. High rigidity slides is designed mainly for heavy plunge cutting and heavy turrets can be stand high tangential cutting force.
There is huge space for processing many chips in this machine and the wide door can be opened from floor to ceiling, so heavy work pieces are transfered smoothly. Furthermore, it is designed a worker can come into the machine inside to get the workability of exchanging and adjusting tools.
CNC TURRET LATHE X39
Machine Specification - CNC TURRET LATHE X39
A06718
Capacity Range O.D.(φmm) 200 to 300
Range Width(mm) 200
Range Weight(kg) 30
Main Spindle

 Diameter(φmm) 120
Bore(φmm) 65
Max speed(rpm) 800
NC Slide NC Slide NC400A(srant type)
Travel
Servo Motor Output
Rapid Speed		 X-axis:350mm Z-axis:350mm
X-axis:2.0kW 4000rpm Z-axis:2.0kW 4000rpm
30m/min
NC Mitsubishi MELDAS70 series(default)
FANUC FANUC Series 0i, FANUC Series 16i/18i/21i, etc.
Chuck Outer grip chuck No6A-2, -2T
Inner expansion collet Chuck SC1, etc
Triple claw chuck by each manufacturer*
Chuck Cylinder Hydraulic C175FV
Autoloader Hydraulic N40SC*
Unloader Pneumatic KT41-B*, -C*, -P*
Pusher Hydraulic PO-50*, PS-4*
Pneumatic PA-50*, PS-50*
Chip Conveyor Chain type Flat Chain type(Tsubakimoto)
Screw type with screw shaft type, without screw shaft type
Power Unit Main Spindle Motor Output 15kW
Hydraulic Pump
Pressure
Discharge		 2.2kW-4P
1.5 to 3.5Mpa
25L/min(50Hz), 30L/min(60Hz)
Lubricator 3W, /5.5cc/60min
Machine Size Floor space
W x D (mm)		 3300 x 1650**
Mass of Machine (t) ---***
*
Option
**
Depending on machine specifications, Machine size must be changed.
***
Depending on machine specifications, Mass of machine must be changed.
General view
CNC TURRET LATHE X39 Front View
CNC TURRET LATHE X39 Back View
CNC TURRET LATHE X39 Front View
CNC TURRET LATHE X39 Back View
Operation Explanation
High rigidity slide performs sliding-surface width; 400 mm of Z-axis and 260 mm of X-axis and sliding weight more than 500 kgs.
And straightness accuracy of the Z-axis is improved with 85mm narrow-width guide, so that it is coped with slide escape on radial load.
Chip processing becomes a problem in order to make a prolonged automatic operation. Therefore, this machine has a structure that all NC-slides and the slide bed are installed in the inclination of 35 degrees towards chip conveyer side. So all cutting-chips drops into the chip conveyer.
This machine is developed mainly for purpose of cutting large-diameter work pieces over φ200 mm and has huge space around the chuck to process many chips effeciently.
The four faces horizontal turret attached with this machine is designed for heavy plunge cutting to large-diameter work pieces.
Even if an isolating bite for cutting internal diagram sticks out more than 100 mm, surface roughness should be stable. So, a bite for maximum 40 mm can be attached on the square spall which has a large-diameter cup ring.
Cover inside
Four faces horizontal turret
Cover inside
Four faces horizontal turret
The distance from a worker to chuck is short and a worker can come into the machine inside by a full-open auto door when exchanging bites, jaws of chuck or stopper and adjusting autoloader and unloader.
The control console panel is built into the front of the machine. The worker managing the line can administer in the view.
Front View
Srant bed
Operation panel
Front door View
Srant bed
Operation panel
Copyright (c) NIHON SHINBAN CO.,Ltd. All Rights Reserved.